- 0.1 to 125 watt power range (SSB and CW), 100W on 6M.
- Easy to read LED display for SWR and status.
- 8000 3-D memories for instantaneous band changing.
- Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
- Selectable user parameters: Auto/Semi, threshold, and more.
- 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
- Tunes 6 to 1000 ohm loads (16 to 150 on 6M), 6 to 4000 ohms with optional 4:1 Balun.
- For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
- Power requirements: 11 to 16 volts DC at 300 mA Max. 25 uA standby current.
- User installable 8-AA or 8-AAA battery holder (not supplied).
- Small Size Enclosure: 7.7L” x 5.0W” x 1.5H”.
- Weight: 1.5 pounds.
- Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
- Optional interfaces for Icom and Yaesu available.
Note for use with FT-857(D) or FT-897(D): If you plan to use VHF
or UHF, these two radios may transmit a small amount of VHF/UHF RF
energy out of the HF connector and will fool the tuner into
tuning. Not all radios do this. This anomaly with the radio does
not hurt the radio or the tuner. Simply turn off DC power to the
tuner or place the tuner into Semi mode if the issue becomes too
annoying.